MB-22® E-Z Polishing Kit
Expert Advice
Industry Leader
Safe for Natural Stone
Trusted by Professionals
About the Product
Guide
Reviews
Data Sheets
MB‑22® EZ Polishing Powder Kit – Deep Gloss for Marble, Limestone & Terrazzo in Minutes
With all the essential items included, you’ll have everything you need to achieve a stunning shine. One of the best things about MB-22® E-Z Polishing Kit is that it won’t cause any splatter-induced etching on your surfaces.
It’s specially developed to be used on calcite-based stones and terrazzo, ensuring optimal results every time. So go ahead and give your marble and terrazzo the care they deserve with this amazing polishing kit!
What’s In The Box?
| Qty | Component | Purpose |
| 1 | 8 oz MB‑22® EZ Polish Powder | Restores mirror‑like gloss without etching splatter |
| 1 | 5″ Drill Attachment + Velcro Pad Driver | Turns your drill into a mini‑polisher |
| 2 | 5″ Hog’s‑Hair Pads | Aggressive natural fiber pad for rapid polish |
| 1 | 5″ White Finishing Pad | Final buff & swirl‑free sheen |
| 1 | Easy Oxy Quart w/ Sprayer | Biodegradable, non‑toxic clean‑up & daily maintenance |
Why Pros & DIYers Choose MB‑22®
Wet‑polish formula that won’t etch on splash‑back. Work confidently around sinks and backsplashes
One drill, one pad, one powder. No multi‑grit guessing game—shine arrives in a single pass.
Calcite & terrazzo specific. Engineered chemistry for marble, limestone, onyx, and terrazzo floors or counters.
Low mess, low odor. Thick paste consistency stays where you put it; light citrus scent.
How To Use (Countertops)
- Prep. Remove coatings or sealers; clean the stone.
- Paste. Sprinkle ≈ ⅓ oz powder over 2–3 sq ft; mist until a thick paste forms.
- Polish. Center hog’s‑hair pad on the paste, run drill at slow speed with light, even pressure for about 1 minute per sq ft .
- Rinse & buff. Wipe slurry, spray Easy Oxy, buff dry with the white pad for final pop.
Floor application: use floor machine, 3‑4 minutes per 10–12 sq ft; repeat for added luster
| Property | MB‑22 EZ Polish | Easy Oxy Cleaner |
| Appearance | Off‑white powder | Clear liquid |
| pH (in use) | ~7 (neutral) | 7.0 (neutral) |
| Odor | Mild | Fresh orange |
| Stone Compatibility | Marble, limestone, onyx, travertine, terrazzo | All natural & engineered stone, metal, fabric |
| Shelf Life | 24 months sealed | 18 months sealed |
FAQ
Will it work on etched marble?
Rough etching requires a honing step first. On smooth surface etches or if the surface is uniform, MB‑22 brings back the gloss.
Is a variable‑speed polisher better than a drill?
A rotary polisher speeds the job, but any drill that accepts the 5″ attachment will achieve the same finish.
Do I need to seal after polishing?
Calcite stones stay porous; follow up with MB‑24 Barrier Impregnating Sealer for long‑term stain resistance.
Note:
- You will be able to get a good result close to edges, sinks, faucets, tub surrounds, and tight spaces. A white pad cut 1/2 inch over the diameter of the pad driver protects fixtures or surfaces you are polishing against.
- All powders are packed by weight and not by volume.
- Different stones may require different quantities of product along with various techniques. If you are in doubt, don’t hesitate to call 888-509-5831 for help using this product.
- Also available in larger quantities, please call to order.
Preparation:
- Mask your work area to protect surfaces that you are not tackling at this time.
- Wear proper protective equipment like safety glasses and gloves.
- Make sure the surface is free of any coatings, waxes, sealers grease, and or soil.
- For best results use a right-angle variable speed grinder/polisher with a 5-inch pad driver and a hogs hair pad.
Directions:
Easy Oxy:
- Clean the surface free from any dirt, grime, or debris with the Easy Oxy pH-neutral cleaner.
MB-22 EZ Polish:
- Use about a 1/4 – 1/8 teaspoon of powder per 2-3 square feet (note the amounts will vary) of product and use enough water to create a wet paste but thick enough not to make a splattering mess.
- Start by placing the product in the center of your target area.
- Add water to make a paste. Should be the consistency of toothpaste.
- Place your machine with the hogs hair directly on top of your paste.
- Starting slowly spread the product out over the area. (The use of pressure will vary depending on the stone but generally, you can apply even light pressure.)
- Run the machine on a slow setting for about a minute per sq. ft.
TIP: Working with this polish, you will find you are able to get a good result close to edges, sinks, faucets, tub surrounds, and tight spaces. A white pad cut 1/2 inch over the diameter of the pad driver protects the fixture or surface you are polishing against. Also, note that every stone is different and may require tweaks in the amount of product or technique.