Bath & Shower Deluxe Kit
About the Product
Guide
Reviews
Data Sheets
Preparation:
- Use rubber gloves to avoid contact with the skin.
- Dilute MB-3 Soap & Mineral in a proportion of 1 part MB-3 to 2 parts warm water with the 32oz spray bottle.
- Use MB-5 as needed before during and after MB-3 or MB-9.
- Test on a spare piece or in an inconspicuous area first.
Directions:
Step 1: MB-3
- Liberally apply with a sponge and allow to stand without letting the solution dry.
- Once the soap scum begins to break up, scrub lightly with a scrub brush or plastic scouring pad.
- Rinse thoroughly.
- Repeat these steps if necessary.
Step 2: MB-9
- Spray on liberally.
- Allow mold or mildew stains to disappear, and be careful to not allow the product to dry on the surface.
- Rinse thoroughly.
- Repeat these steps if necessary.
Step 3/As needed: MB-5
- Hold the sprayer about 6 to 8 inches from the surface.
- Spray a light mist over the area to be cleaned.
- Let the product sit for approximately 30 seconds.
- Buff the surface dry with a paper towel or a clean white cloth.
- When the towel becomes wet, discard it and start with a fresh one.