Granite & Marble Chip Repair Kit

Preparation:

• Make sure the area to be repaired is clean and dry.
• After cleaning with something like our MB-5 or Easy Oxy allow plenty of dry time to avoid interference with adhesion.

Directions:

1. Use popsicle sticks or tongue depressors to mix equal parts of the Lamlock RocketGel epoxy A and B as per the directions. You can use a non-waxed paper cup or just a spare piece of brown cardboard (neither provided).
2. Once mixed thoroughly per directions, it’s time to fill the chip. Take a new, clean mixing stick and use it like a trowel to move the glue over the stone. (After application place the container with the remaining mixed epoxy where it can stay until it has cooled to room temperature.)
3. Allow the initial application to set up for 15 minutes.
4. Use a clean razor blade to remove any excess epoxy, making it level.
5. Remove the tape and place with other remnants that are cooling to room temperature.
6. Grab another clean razor blade and at a 45-degree angle to the stone slice off any excess epoxy leaving the top of the repair the same plane as the rest of the stone.
7. It will take 24 hours to cure fully. After the full cure seal the stone with the Hydrex by Tenax to protect the shine from acid and make it stainproof.

TIP:

• If you get any of the Lamlock RocketGel on the surface, it should be easy to remove. Just simply rub it off with your thumb.
• A full cure is 24 hours!
• If you have questions on this product, we recommend contacting the manufacturer directly. Defusco Industrial Supply @ 800-289-6834.