Expert Advice
Industry Leader
Made in the USA
Safe for Natural Stone
Trusted by Professionals
About the Product
Guide
Reviews
More Information

Give your home the touch of luxury and cleanliness it deserves with the Complete Stone Care Starter Kit! This all-inclusive solution comes complete with everything necessary to maintain, clean, and protect your natural stone surfaces. The miraculous MB-5 Stone & More Multi Surface Spray Cleaner within the kit, crafted to perfection, will clean all your natural stone surfaces, fixtures, glass, and mirrors to an impeccable sparkle. Get further into the cleanliness with the MB-3 or MB-9, specifically designed to cleanse deeper, removing challenging soap scum, ingrained mineral deposits, mold, and mildew from your precious stone surfaces. And remember, cleanliness starts from the ground up, so don’t overlook your floors. With our unique MB-1 Floor Amore, all your floors, whether they’re stone, hardwood, vinyl, or porcelain, will look just as immaculate as the rest of your home. Choose excellence, choose the Complete Stone Care Starter Kit!

Complete Stone Care Starter Kit includes:
- (1) Quart of MB-1 Floor Amore One Step Cleaner
- (1) Quart of MB-3 Soap & Mineral Deposit Remover
- (1) Quart of MB-5 Stone & More Multi Surface Spray Cleaner
- (1) Quart of MB-9 Mold & Mildew Remover
- (1) Grout Brush
- (1) 32oz Spray Bottle
Directions:
Step 1: MB-3
- Use rubber gloves to avoid contact with the skin.
- Dilute MB-3 in a proportion of 1 part MB-3 to 2 parts warm water.
- Liberally apply with a sponge and allow to stand—without letting the solution dry until the soap scum begins to break up.
- Scrub lightly with a scrub brush or plastic scouring pad.
- Rinse thoroughly.
- Repeat the process if necessary.
Step 2: MB-9
- Spray on liberally.
- Allow mold or mildew stains to disappear, and be careful to not allow the product to dry on the surface.
- Rinse thoroughly.
Step 3: MB-5
- Hold the sprayer about 6 to 8 inches from the surface.
- Spray a light mist over the area to be cleaned.
- Let the product sit for approximately 30 seconds.
- Buff the surface dry with a paper towel or a clean white cloth.
- When the towel becomes wet, discard it and start with a fresh one.
- Repeat as necessary.
Step 4: MB-1
- Mix approximately 1 to 3 ounces (4 to 12 cap fulls) according to soil conditions with 1 gallon of warm water.
- Mop as usual.
DO NOT RINSE. Rinsing would remove the organic salts in the formula that were designed to remain on the floor surface. DO NOT use more product than the proportion indicated. Though no damage would occur, rinsing would be necessary to prevent a buildup.
Product Description
Complete Stone Care Starter Kit
Complete Stone Care Starter Kit includes:
(1) Quart of MB-1 Floor Amore One Step Cleaner
(1) Quart of MB-3 Soap & Mineral Deposit Remover
(1) Quart of MB-5 Stone & More Multi Surface Spray Cleaner
(1) Quart of MB-9 Mold & Mildew Remover
(1) Grout Brush
(1) 32oz Spray Bottle
MB-1 Floor Amore One Step Cleaner
MB-1 Floor Amore One Step Cleaner is a highly concentrated, slightly alkaline detergent with a twist! It is rinse free and leaves no dulling film. Special organic salts in its formula act as “moisturizers” this preventing natural stone from “drying out”. It also contains optical brighteners to enhance the finish of the surfaces on which it is used and maintains a natural, streak free look. Originally designed for marble and granite, it is gentle enough to be safely used on hardwood, ceramic, resilient tile and any other hard surface not harmed by water.
Directions for use:
Mix approximately 1 to 3 ounces (4 to 12 capfuls) – according to the level of soil on the floor – with 1 gallon of warm water. Then mop as usual. Do not rinse. rinsing would remove the organic salts in the formula that were designed to remain on the floor surface. Do not use more product than the proportion indicated. Though no damage would occur, rinsing would be necessary.
MB-3 Soap & Mineral Deposit Remover
MB-3 Soap & Mineral Deposit Remover is specifically designed to safely dissolve soap and mineral deposits from natural stone, tile, glass and fiberglass. Uses a unique combination of special non-acid chemicals that quickly and easily dissolve and remove dingy, unsanitary soap scum and hard water deposits from shower walls, floors, doors, wash basins, and bath tubs. Does effortlessly what can’t be done even by hard scrubbing with ordinary cleaners and abrasives. MB-3 Soap & Mineral Deposit Remover is highly effective and safe on most natural marble glossy surfaces. Be certain to test product on a spare tile or inconspicuous area for extra caution before use.
Directions for use:
Use rubber gloves to avoid contact to the skin. Dilute MB-3 Soap & Mineral in a proportion 1 to 2 with warm water. Liberally apply with a sponge and allow to stand, without letting the solution dry, until soap scum begins to break up. Scrub slightly with a scrub brush or plastic scouring pad. Rinse thoroughly. Repeat process if necessary. Drying is not required.
MB-5 Stone & More Multi Surface Spray Cleaner
MB-5 Stone & More Multi Surface Spray Cleaner uses a pH neutral combination of special chemicals that quickly and easily cleans marble, granite, ceramic, corian, porcelain, glass, including mirrors and most other hard surfaces. It also works great on bath and kitchen fixtures. Safe to use daily. Not designed to clean heavily soiled areas or remove soap build up. (For heavy duty cleaning and removal of soap build up, use our MB-3 Soap & Mineral Deposit Remover.)
Directions for use:
Hold sprayer about 6 to 8 inches from surface, then spray a light mist over the area to be cleaned. Let the product sit for approximately 30 seconds. Buff the surface dry with a paper towel or a clean white cloth. When towel becomes wet, discard and start with a fresh one.
MB-9 Mold & Mildew Remover
MB-9 Mold & Mildew Remover cleans without scrubbing. Removes mold, mildew stains, and odor on contact. Regular use (every 2 to 4 weeks, depending on level of use) will keep surfaces clean. It is safe on most natural marble surfaces. Be certain to test product first on a spare tile or inconspicuous area for extra caution before use.
Directions for use:
Spray on liberally. Allow mold or mildew stain to disappear, be careful to not allow product to dry on the surface. Then rinse thoroughly. Repeat these steps if necessary. In the case of very old stubborn staining, you can use a soft brush to help break up stain. Drying is not necessary. If used on surfaces that will touch food, rinse thoroughly at least twice.
Made in the USA