Mold Ahoy Mold & Mildew Stain Remover

Ahoy there, boat enthusiasts and outdoor adventurers! Get ready to set sail with confidence

as we introduce Mold Ahoy – your ultimate solution for tackling stubborn mold and

mildew in the challenging marine environment. Mold Ahoy is your trusty first mate, ready

to combat mold and mildew on all watercraft and boat surfaces, making it an absolute

must-have onboard every vessel. Why settle for anything less than exceptional?

Instructions for Use:

1. Before use, test Mold Ahoy on a small, inconspicuous area to ensure compatibility and


2. Apply Mold Ahoy using a soft brush, roller, or sprayer, depending oyour preference.

3. Allow product to dwell for 10 to 15 minutes on the affected area.

4. Apply more Mold Ahoy and use a soft bristle brush to gently agitate the area.

5. After cleaning, thoroughly rinse the treated surface with water to remove any residue.

Repeat Steps 2 through 5 if Necessary

Residual and Alternate Application: Spray Mold Ahoy on the surface and leave it wet.

This residual application will continue working for up to a month, removing stains and

making cleaning easier.

Recommended Temperature: For best results, use Mold Ahoy in temperatures of 45°F

and above.

With no bleach or peroxides, Mold Ahoy is safe to use, ensuring that every surface is left

sparkling clean and damage-free. But Mold Ahoy isn’t limited to just boats and watercraft.

This marvel works wonders on a wide range of materials, from canvas and screens

to siding, wood decks, painted surfaces, composites, awnings, aluminum, driveways,

recreational vehicles, and more! It’s like having a versatile cleaning superhero on your

side. Concrete, masonry, fabric, stone, rubber, vinyl, teak – you name it, Mold Ahoy can

handle it! Even those hard-to-reach areas like boat bilges, carpeting, canvas, fiberglass,

and sails won’t stand a chance against Mold Ahoy’s powerful cleaning power.